جديد عربة الصهريج لنقل المواد الغذائية Letina C313F4P2 - Pressure tank (2,0 bar)

Brand: LETINA - Tank for the transportation food stuff and non-dangerous liquids.
Type: L01
Vehicle Code: C313F5R2

Description: Stainless steel Tank for transportation foodstuff and non-dangerous liquids,
with a capacity of approximately 31,500 Liters,
divided into 3 compartments (12,000L + 6,000L + 13,500L),
thermally insulated – according to ATP regulations, operating pressure 2,0 bar, test pressure 2,6 bar.

Technical description:

Tank:
Made of AISI 304 (DIN 1.4301) quality stainless steel material, with a filling manhole on each compartment, with stainless steel inner rings
• Tank Volume: 31.500 Liters (+/- 2%)
• Number of Compartments: 3 (12,000L / 6,000L / 13,500L)
• Manholes:
o 3 x Filling manholes, size DN500
o Each manhole cover has safety relief valve +2.0 Bar / -0.2 Bar
o Each manhole cover has anti-accidental closure hook
• Manhole Spill Box, Square Design:
o On the top of the vessels
o Stainless steel, insulated
o 2 hinged lids with lock, insulated
• Insulation and Cladding: - According to ATP "IN"
o Body Insulation: approx. 50 mm polyurethane
o Tank Heads Insulation: 100 mm glass wool
o Insulation Cladding: Stainless steel
o Bottoms Cladding: Fiberglass – RAL 7016 Anthracite Grey
• Operation Pressure:
• operating pressure 2,0 bar, test pressure 2,6 bar
• Pressurized system: combined with CIP washing system, connection for air filter with „T“connection at front right side, with pressure gauge.
• Walkway: Aluminium anti-slip walkway along the tank and around manhole catch basins, on the right side.
• Handrail: Folding handrail in stainless steel
• CIP - washing system: Inlet in tank left side, 5 independent spray heads (2+1+2) and a shut-off valve for each spray head, stainless steel pipeline DN50 connection on the rear right side
• Hose Deflectors: Bar to protect the insulation and cladding of the tank installed on the upper right and left sides of the tank
• Ladder: Stainless steel ladder with non-slip steps located at the back of the tank
• Ladder for entering the tank: Stainless steel ladder – on the top of the tank
Discharge System
• Bottom Valves: 3 x DN100, with handwheel control on the top
• Discharge Line: 1 x DN100 Discharge pipe insulated and covered with black tape, output at the rear centrally in discharge box with double doors.
• Discharge Valves: DN100 butterfly outlet valve with cap, manually operated, in outlet box


Chassis:
Technical description:
Berger Ecotrail, model SATA 10.5 - galvanized
Coupling height: 1150 mm
Tires/rims: Continental / 385/65 R 22,5 / aluminium rims – Alcoa DuraBright
Welded frame construction made of fine-grained steel S700
Partly zinc coating for tank chassis, upper chord, external web plate, lower chord ahead, front and rear closure
3 × SAF-axles, ET 120, Integral disc brake 22,5"
1st axle liftable, Wabco, fully automatic; lift only during drive from 16 km/h
(ATTENTION: ground clearance for LTMn/LTMCn approx. 120mm)
Automatic traction equipment, if the truck has activated its ASR and sends information by CAN to the trailer. (also above 30 km/h)
(Serial equipment of traction equipment to be activated by brake pedal or by switch up to 30 km/h)
Starting assistance (forced lowering / lifting) via lifting axle, electrically controllable via PIN 12 (by push-button in the truck)
RDKS SCB-CTU (6-wheels with Tire pressure monitoring sensors)
6 × Splash guard mounted at all mud guards
Wabco EBS brake system, E Generation 2S/2M, spring-controlled parking brake with double release valve, conventional air suspension with rotary slide valve
RTR (Reset-to-Ride) automatic reset of the air suspension (lifting/lowering valve) to driving level
Coupling head standard (air connections red/yellow)
Seat posts, brand „Jost“, with thrust compensation
Stainless steel package:
Fender bracket, socket bracket, light carriers foldable incl. bracket and screw fitting for supporting device.
Shim with holder (2 pcs.)
Side protection fix mounted, naturally anodized aluminium, standard version - for SATA / SAAG
Sockets on the front wall, 2×7 pins and 1×15 pins (DIN ISO 3731/12098)
Spare wheel holder in winch version in front of the 1st axle right side

Lighting and Accessories:
24 volts lighting system, type Hella, multifunctional rear lighting (including rear fog lamp and reversing light),
2 clearance lights with rubber arms (LED),
2 clearance lights (LED) on the front wall,
4 pairs of side marker lights (LED)
2 X Reversing light LED on the rear underride
Colors
• Chassis Color: RAL7016
• Bottoms Cladding: RAL7001
• Axle Color: RAL 9005 Jet Black


WE ARE LOOKING FOR DISTRIBUTION PARTNERS!

Expand your product range with the high-quality Letina tank trucks.

If you are interested in representing our products in countries where we do not yet have a distribution network, please contact us. We are looking for reliable partners for long-term cooperation.

Want to learn more?

For a detailed quote, technical specifications, or further information, please contact us.