Semi trailer tank for the transport of food-grade and non-hazardous liquids, stainless steel tank with a capacity of approximately 31,000 liters, divided into 3 compartments (12,000 l + 6,300 l + 13,000 l), thermally insulated - ATP, non-pressurized tank.

Technical Information:
• Tank material: AISI 304 (DIN 1.4301)
• Tank mounting: Internal rings in stainless steel
• Tank Volume: app.31.000 Liters (+/- 2%)
• Number of Compartments: 3
o Compartment volume: 1. - 12,000L, 2. - 6,000L, 3. - 13,000L (+/-2%)
• Manholes:
o 3 x DN500 manholes openings
o Each manhole cover has one-bolt closure
o Each manhole cover has ventilation valve
o Each manhole cover has anti-accidental closure hooks
• Manhole spill boxes, square design:
o 3x Located on the top of the tank
o Made from stainless steel, insulated
o 2 drainpipes on each spill box
o 2 hinged lids with lock, insulated
• Insulation: - According to ATP "IN" standards - with ATP certificate
o Body insulation: ca. 50 mm polyurethane
o Tank bottoms insulation: 100 mm glass wool
• Insulation cladding:
o Tank / shell: Stainless steel
o Bottoms: Fiberglass – standard white
• Operation pressure: Suitable for operation at atmospheric pressure
• Walkway and access ladder:
o Aluminium anti-slip walkway along the tank and around manhole spill boxes on the right side
o Folding handrail in stainless steel, operated by access ladder at ground level
o Access ladder in stainless steel located at rear right side
• Ladder for entering the tank: stainless steel; located at the walkway
• Thermometers: Without / no thermometers
• CIP tank cleaning system:
o Washing system with 5 wash heads (2+1+2) and a shut-off valve for each head
o Stainless steel DN50 pipeline
o Inlet in tank centrally on the top
o CIP connection: routed down on the rear right side with a DN 50 blind cap
o CIP discharge without valve
• Hose deflectors:
o Bars for protection of the insulation and cladding of the tank installed on the upper right and left sides of the tank
• Discharge system:
o Bottom valves:
 3 x DN100, with handwheel control on the top
o Discharge pipe:
 1 x Discharge pipe DN 100 insulated and covered PE black tape
o Discharge pipe location:
 At the rear center in the discharge box
o Discharge valve:
 1 x DN100 manually operated butterfly valve at the end of the pipe
• Discharge Box:
o Stainless steel box with double doors, positioned rear-centrally above the bumper.
• Additional equipment:
o Cable preparation under rear insulation, from the bottom left to the top center
Chasis:
Berger Ecotrail, model SATA 10.5
• Frame
o Welded frame construction made of fine-grained steel S700
o Partly zinc coating for tank chassis, upper and lower frame plate, external web plate, front and rear end
o Coupling height: 1150 mm
o Seat posts, Jost, with thrust compensation
o Wheel chock with holder (2 pcs.)
o Color: RAL 7016 Antracit
o Length: 10.5 m
• Undercarriage
o Tires: Continental; 385/65 R 22,5 160K
o Wheels: Aluminium wheel; Alcoa Ultra ONE Dura-Bright
o Axles:
 3 × SAF, ET 120, Integral disc brake 22,5"
 1st axle liftable, Wabco, fully automatic; lift only during drive from 16 km/h
(ATTENTION: ground clearance for LTMn/LTMCn approx. 120mm)
o TPMS - RDKS SCB-CTU (6-wheels with Tire pressure monitoring sensors)
o 6 × Splash guard mounted at all mud guards
• Electrical system
o Starting assistance (forced lowering / lifting) via lifting axle, electrically controllable via PIN 12 (by means of a button in the truck)
o TrailerConnect telematics including tire pressure monitoring system consisting of:
 TrailerConnect control unit CTU incl. battery
 TrailerConnect service package: Alert, Trailer Status and Alarms (12 months included)
 Tire pressure monitoring sensors mounted via rim tape
o Sockets on the front wall, 2×7 pins and 1×15 pins (DIN ISO 3731/12098)
• Braking system
o Wabco EBS brake system, E Generation 2S/2M, spring-controlled parking brake with double release valve, conventional air suspension with rotary slide valve
o RTR (Reset-to-Ride) automatic reset of the air suspension (lifting/lowering valve) to driving level
o Coupling head standard (air connections red/yellow)
• Stainless steel package:
o Mud guard bracket, socket bracket, Foldable light bar including bracket and the
screw fixing of the support device
o Side protection permanently mounted, naturally anodized aluminium, standard version - for SATA
• Lighting and Accessories:
o 24 volts lighting system, type Hella, multifunctional rear lighting (including rear fog lamp and reversing light)
o 2 marker lights with rubber arms (LED)
o 2 side marker lights (LED) on the front wall
• Additional equipment:
o 2 X Reversing light LED on the rear underride
o Spare wheel holder in winch version in front of the 1st axle right side